•Noise
Monitoring |
•Air
Monitoring |
•Water
Monitoring |
•Meteorological
Monitoring |
•Indoor
Conditions Monitoring |
•New
Products |
|
|
噪音監測系統
Noise Monitoring System |
|
Cesva
Sound Level Meter
SC-30
INTEGRATING SOUND LEVEL METER REAL TIME FREQUENCY ANALYZER
•
Type 1 integrating sound level meter.
• Octave
band spectrum analyser 31.5 Hz-16kHz. IEC 61260:1995.
•
Graphic screen and membrane keyboard for easy use.
•
Measures all parameters at the same time with frequency weightings.
• Measurement
range: 23-140 dB.
•
One single scale (no scale changes).
• Measurement
results may be stored in the memory.
•
Includes software for real time retrieval of all the measured
and recorded data and their transmission to a PC.
•
Detachable preamplifier for use of the extension cable (CNR-012)
and the outdoor kit (TK-1000).
>>Specifications |
|
Cesva
Sound Level Meter
SC-20e
INTEGRATING SOUND LEVEL METER
•
Type 1 integrating sound level meter according to EN 60651 and
EN 60804.
•
Measures all parameters at the same
time: LS, LF, LeqT, Leq1’’, LCpk, L1, L5, L10, L50,
L90, L95, L99, maximum values, duration of measurement
and Leqt with programmable t.
•
23 – 130 dB measurement range.
•
One single scale (no scale changes).
•
A and C frequency weightings.
•
Allows you to store the measuremet
results in the memory and save all the measured parameters
second by second for 3 hours.
•
Equipped with AUTOSTORE recording
for long-duration (1 week) Leq measurements.
•
Includes software to transfer all
measured and recorded parameters to a PC.
•
Removable preamplifier, CNR-012
extension cable and TK-1000 outdoor kit.
>>Specifications |
|
Cesva
Sound Level Meter
SC-20c
INTEGRATING SOUND LEVEL METER
•
Integrating
averaging Sound Level Meter type 1 according EN 60651 and
EN 60804.
•
All
parameters are measured at the same time: LS, LF, Leq, Leq1’,
Leq1’’, LCpk, L10, L50, L90, maximum values and duration
of the measurement.
•
Measure
Range 23 – 130 dB.
•
It
has a single range (No scale change).
•
A
and C Frequency weightings.
•
It
allows you to store the measurement results into SLM’s internal
memory and register all parameters second by second
up to 3 hours.
•
AUTOSTORE
recording mode to carry out long Leq measurements (1 week).
•
Software
application to retrieve all measured parameters and memories
to a PC computer.
>>Specifications |
|